Appliances
Guide
INSTRUCTIONS
- Press the Power Button
- Please select the cycle
- Please press the Play button to start the load
- After the load is complete, please wait for 3-8 seconds before opening since the washer door will be in the lock position, if pulled the washer will be compromised.
- Press the Power Button
- Please select the cycle
- Please press the Play button to start the load
- After the load is complete, please wait for 3-8 seconds before opening since the washer door will be in the lock position, if pulled by force, the dishwasher will be compromised.
GE/Hot Point 4 Burner Models
- Turn dial and select desired temperature setting eg. 350 degrees
- To power off, turn dial in anti-clockwise direction
Hot Point 2 Burner Models
- Press power and select desired temperature setting eg. 350 degrees
- To turn off, press power button
GE/ Whirpool & Frigidaire Models
- Please select Bake
- Select desired temperature setting eg. 350 degrees
- Please select START to ignite the oven
- To power off please select Cancel or STOPHot Point Models
- Turn the knob to function
- Select desired temperature settings eg. 350 degrees
- Oven will ignite
GE Models
- Please open and close the door
- Select the desired time
- Select START
Beko Models
- Turn the dial to the desired time
- Please select START
Hamilton Beach Carafe Less Coffee Maker
- Fiil coffee tank with desired amount of cold water. Holding coffee tank level, use Water Level Guide on the inside of coffee tank to ensure correct amount of water. Do not exceed water MAX level.
- Pour water from coffee tank into water reservoir.
- Place coffee tank on keep warm plate. Place filter basket on coffee tank.
- Place a disposable paper filter in the filter basket. Use a good quality cupcake (basket) style filter (8 to 12 cup size). A permanent filter may also be used.
- For each cup of coffee being made, neatly place ¾ tablespoon of automatic drip ground coffee into filter basket. Prevent any grounds inside coffee tank. Make sure lid is fully closed.
- Press ON/OFF button once for coffee and light will glow.
- DO NOT open lid during and just after brewing to preserve the coffee's heat and flavor.
- To dispense coffee, press dispenser with a cup. Remove cup when desired amount has been dispensed.
- The Brew Station features a two-hour automatic shut off. To turn off sooner, press ON/OFF button and the indicator light will turn off.
- When finished, push ON/OFF button to turn off, then unplug Brew Station. Do not open coffeemaker until it has been turned off. Always allow to cool before cleaning.
Orbita Model
To close:
- Enter your 3-6 digit code.
- Hold the door closed and press LOCK
To open:
- Enter your code
- The safe will automatically open
ProHT, First Alert or Pro Source Models
To lock safe for the first time:
- Press the red button behind safe door
- Close door and enter a 4 digit code
- Press “A” or “B” key
- Re-enter your code and turn knob after green light.
To open:
- Enter previous 4 digit code & letter
- Turn the knob to open safe